|
Legacy's Systemsyzer Chiller System Design Software is ideal for
Process Engineers, Contractors and End Users who need fast
chiller related calculations.
Highlights of SystemSyzer
capabilities
1.
Performs advanced computations on up to three chiller process loads.
2.
Calculates process branch loads in BTUH, KWH and Tons of
refrigeration
3.
Provides automatic glycol thermal load and pressure drop
adjustments
4.
Calculates both header and branch pipe sizes
5.
Recommends chiller system pump flow and pressure requirements
6.
Create out put report for chiller quote
Getting Certified to use
SystemSyzer: Have a look at our 2011
Process
Chiller Training Webinar series.
Getting your FREE copy of
SystemSyzer: Complete the form in the left column of
this page requiring only your Name, Phone and Email address.
Once your form is submitted you will receive a copy of
SystemSyzer to your email address normally in about 30 minutes.
If you use a fire wall or email filter program make sure to
register support@legacychillers.com as one of your friends.
Program Requirements:
SystemSyzer is based on MS EXCEL v 2003 so it runs on most
machines with MS OFFICE version 2003 or latter. Software should
also run on most Apple machines as well. If you network
administrator will not allow XL files to run with Micro's
enabled some of the functions in this program may not run.
Original files from Legacy servers are 100% virus free.
Questions: Should you have any trouble running SystemSyzer please consult
your network administrator. For assistance using this product,
Legacy has an in-depth
training video available from our Knowledgbase system. For
additional questions you can contact Legacy Engineering at
877-988-5464
|
